CT-40 Do All Mortar™

Polymer modified concrete repair mortar with corrosion inhibitor

Repair Thickness

Featheredge to 1 1/2"

Set Time

20 Minutes
Application Technique

Brush, Broom, Trowel
Description

CT-40 Do All Mortar is a 1 component, polymer modified, high performance concrete repair mortar with integral corrosion inhibitor. CT-40 Do All Mortar is simply mixed with water and applied from featheredge to 1 1/2″ thick in one application. Apply horizontal, vertical or overhead. Product sets in approximately 20 minutes and is ready for light traffic in 3 to 4 hours at 70 degrees Fahrenheit.

Dependable and Durable

• Heavy duty – Over 5000 psi
• Corrosion inhibitor included
• Portland Cement based
• One component – Just add water

• Shrinkage-compensated
• Polymer modified
• 14 colors available –
See TintCrete™ Patch
Where to Use

• Featheredge to over 1 1/2″ thick
• Patch concrete and mortar
• Interior or exterior surfaces

• Horizontal, vertical, or overhead
• Warehouse floors, bridges
• Beams, columns, or balconies
• Full depth repairs when extended
Components

CT-40 Do All Mortar is a special blend of cements, aggregates and exclusive modifiers. Designed for general purpose and high performance concrete repair applications.  Not recommended as an overlay for large areas.

Application

Trowel apply. Apply material within 15-20 minutes of mixing. Rub or scratch part of the mixed material onto surface just prior to application.

Packaging and Yield
Unit Size Approx. yield

50 lb. heavy-duty polyethylene bag

0.43 cu. ft.
Buy Now
JOIN OUR NEWSLETTER