CT-40 Do All Mortar™

Polymer modified concrete repair mortar with corrosion inhibitor

Repair Thickness

Featheredge to 1 1/2"

Set Time

20 Minutes

Application Technique

Brush, Broom, Trowel

Description

CT-40 Do All Mortar is a 1 component, polymer modified, high performance concrete repair and resurfacing mortar with integral corrosion inhibitor. CT-40 Do All Mortar is simply mixed with water and applied from featheredge to 1 1/2" thick in one application. Apply horizontal, vertical or overhead. Product sets in 20 to 45 minutes and ready for light traffic in 3 to 4 hours at 70 degrees Fahrenheit.

Dependable and Durable

• Heavy duty – Over 4500 psi
• Corrosion inhibitor included
• Portland Cement based
• One component – Just add water

• Shrinkage-compensated
• Polymer modified
• Custom colors available -
  See TintCrete™ Patch

Where to Use

• Featheredge to over 1 1/2" thick
• Patch concrete and mortar
• Resurface concrete
• Interior or exterior surfaces

• Horizontal, vertical, or overhead
• Warehouse floors, bridges
• Beams, columns, or balconies
• Full depth repairs when extended

Components

CT-40 Do All Mortar is a special blend of cements, aggregates and exclusive modifiers. Designed for general purpose and high performance concrete repair or resurfacing applications.

Application

Trowel apply. Apply material within 15-20 minutes of mixing. Rub or scratch part of the mixed material onto surface just prior to application.

Packaging and Yield

Unit Size

Approx. yield

50 lb. heavy-duty polyethylene bag

0.43 cu. ft.

SDS

Spec Data Sheet